137
6
6
Driving your vehicle Navigation-based Smart Cruise Control (NSCC)
the degree of the curve on the road.
The higher the driving speed, deceler
-
ation will start faster.
Highway Set Speed Auto Change
僅 Highway Set Speed Auto Change
function will operate when Smart
Cruise Control set speed and the
highway (or motorway) speed limit is
matched.
僅 Whilst Highway Set Speed Auto
Change function is operating, when
the highway (or motorway), speed
limit changes, Smart Cruise Control
set speed automatically changes to
the changed speed limit.
僅 If Smart Cruise Control set speed is
adjusted different from the speed
limit, Highway Set Speed Auto
Change function will be in the standby
state.
僅 If Highway Set Speed Auto Change
function has changed to the standby
state by driving on a road other than
the highway (or motorway) main road,
Highway Set Speed Auto Change
function will operate again when you
drive on the main road again without
setting the set speed.
僅 If Highway Set Speed Auto Change
function has changed to the standby
state by depressing the brake pedal,
press the ( ) switch to restart the
function.
僅 Highway Set Speed Auto Change
function does not operate on highway
interchanges or junctions.
僅 Highway Set Speed Auto Change
function only operates based on the
speed limits of the highway (or motor
-
way), it does not work with the speed
cameras.
僅 When Highway Set Speed Auto
Change function is operating, the
vehicle automatically accelerates or
decelerates when the highway (or
motorway) speed limit changes.
僅 When Highway Set Speed Auto
Change function is operating, the
vehicle may warn the driver when the
vehicle's set speed limit is above the
speed camera limit.
僅 The maximum set speed for Highway
Set Speed Auto Change function is 90
mph (140 km/h).
僅 If the speed limit of a new road is not
updated in the navigation, Highway
Set Speed Auto Change function may
not operate properly.
僅 If the speed unit is set to a unit other
than the speed unit used in your
country, Highway Set Speed Auto
Change function may not operate
properly.
Limitations of Navigation-based
Smart Cruise Control
Navigation-based Smart Cruise Control
may not operate normally under the fol
-
lowing circumstances:
僅 The navigation is not working prop
-
erly
僅 Speed limit and road information in
the navigation is not updated
僅 The map information and the actual
road is different because of real-time
GPS data or map information error
僅 The navigation searches for a route
whilst driving
僅 GPS signals are blocked in areas such
as a tunnel
To Next Page
Loading...
Need help?
General
