PERIODIC SERVICE 12-23
196OC42A
REPLACING FUEL FILTER
ELEMENT
1. To drain the used oil, remove the right
and left drain plugs and filling plug at
the front axle case and drain the oil
completely into the oil pan.
2. After draining reinstall the drain plugs.
3. Remove the oil level check plug.
4. Fill with the new oil up to the check
plug port.
(See “LUBRCANTS” in Maintenance
Section)
5. After filling reinstall the filling plug and
check plug.
CHANGING FRONT AXLE CASE OIL
Oil Capacity
3.1
(0.82 U.S.gal.)
(1) Check Plug (2) Filling Plug
(3) Drain Plug
(See “Cleaning fuel filter” in every 100
hours maintenance.)
To Next Page
Loading...
Need help?
General
