10-4 CK20
Weight should be added to the rear
wheels only if it is needed to improve
traction or stability. The amount of weight
should directly correspond to the job at
hand and should be removed when not
needed.
The weight should be added to the trac-
tor in the form of liquid ballast, rear wheel
weights or both.
REAR WHEEL WEIGHTS
The rear wheel weights can be attached
to the rear wheel. See your implement
owner’s manual for the proper amount
of weight or consult you local KIOTI
dealer.
FRONT END WEIGHTS
Front end weights can be attached to
the front of the tractors bumper. You
should consult your implement owner’s
manual for the required amount of weight
or contact your local KIOTI dealer for a
recommendation.
IMPORTANT
Never overload the tires.
Do not add more weight than is
necessary, or is indicated in chart.
Maximum weight
17 kg X 3 Pieces
(112 lbs.)
REAR BALLAST
IMPORTANT
Do not overload tires.
Add no more weight than indi-
cated in chart.
Maximum weight
per wheel
20 kg X 2 Pieces
(88.2 lbs.)
196OA05A
BALLAST (OPTIONAL)
FRONT BALLAST
CAUTION
To avoid personal injury:
Additional ballast will be needed
for transporting heavy implements.
When the implement is raised,
drive slowly over rough ground,
regardless of how much ballast
is used.
Do not fill the front wheel with liq-
uid to maintain steering control.
(1) Front End Weights
(2) Rear Wheel Weights
To Next Page
Loading...
Need help?
General
