Kohler KD62V12 Operation And Maintenance Manual

Maintenance
Inspection and maintenance schedules
Task identification
Component
Schedule
Service
Type
Task description
Time limit (h)
Calendar limit (year)
Replacement Overhaul Inspection/Clean Repair/Adjustment
SL102
Centrifugal oil
filter - paper filter
500 2Y X
Replace the paper (sleeve) for sludge at each oil
change. Measure and record thickness of the
sludge accumulated on paper if above limits.
Reduce engine oil interval if the sludge accumu‐
lated is above limits. (For more information see:
5.9.5 Replacing centrifuge paper filter — SL102,
page 114.)
SL121
Engine oil change
with engine oil
“Category 2”
500 2Y X
Oil change maximum interval. Note: Replace engine
oil at least every 2 years. Final engine oil interval
depends on exchange interval factor according to
engine oil category and fuel sulfur rate. 0<fuel
sulfur rate<0.5%: the factor is 1 (no change on the
engine oil change interval). 0.5<fuel Sulfur rate<1%:
the factor is 1/2 (reduce by 2 times the engine oil
change interval and use only engine oil category 2
or 3). 1<fuel sulfur rate <1.5%: requires additional
approval. No oil Category 1 in case of K175. (For
more information see: 5.9.6 Changing engine oil —
SL101, SL121, page 118.)
Engine oil change
with engine oil
“Category 3”
1000 2Y X
SL105 Fuel main filter 1000 2Y X
Replace main fuel filter cartridge. (For more infor‐
mation see: 5.11.3 Replacing main filter - SL105,
page 132.)
SL106
Recommended:
Fuel pre-filters
1000 2Y X
Replace primary fuel filter cartridge.
See the operator and maintenance manual of your
application.
SL107 Oil separator filters 7500 2Y X
Replace oil separator filters. (For more information
see: 5.12.2 Replacing crankcase breather — SL107,
page 134.)
SL108
Recommended: Air
filters + Air ducting
3000 2Y X
Replace the air filter and clean air ducting between
air filter and compressor.
See the operator and maintenance manual of your
application.
SL109 Alternator belt 1500 2Y X X
Inspect conditions of drive belt and fit new one if
necessary. (For more information see:
5.8.1 Removing the battery charging alternator
cover, page 106.) Check belt tension. (For more
information see: 5.8.3 Replacing drive belt — SL 109,
page 108.)
SL110
Alternator belt
tensioner
1500 18Y X
Visual inspection of the tensioner. Replace if
necessary. (For more information see: 5.8.4
Replacing tensioning device — SL110, page 109.)
90
© 2022 by Kohler Co. All rights reserved.
KD62V12 33521030301_8_1 EN_US 2022-09

Kohler KD62V12 Specifications

General

Brand	Kohler
Model	KD62V12
Category	Engine
Language	English