Supplies & Handling
4
bizhub PRO C6501 4-7
To load paper in bypass tray
0 When using the bypass tray, specify the paper type to be loaded on the
tray at the same time. See page 9-44 for details.
0 Do not use paper with staples or paper that conducts electricity (silver,
carbon, etc.), otherwise an accident may occur as a result of fire.
0 To avoid machine trouble, do not use coated paper as follows:
Heat-sensitive paper, silver-coated or carbon-backed paper, OHP trans-
parencies, ink-jet printer paper
1 Open the bypass tray located on the
right side of the machine.
2 Load copy paper, and adjust the pa-
per guides to the paper size.
– Do not load more than 250 sheets
(21 lb Bond) or above the limit in-
dicated on the paper guides, oth-
erwise paper misfeed may be
caused.
The indicator “ ” on the Machine
Status Screen and Copy Screen will
change to “ ”.
3 When copying is completed, close the bypass tray.
To Next Page
Loading...
Need help?
General
