Supplies & Handling
4
bizhub PRO C6501 4-43
4.7 Adding Paste Pellet to Perfect Binder PB-501/PB-502
If the Perfect Binder PB-501/PB-502 is out of paste pellets, the machine
warmup cannot be completed with the following message displayed on the
Machine Status Screen, and consequently the binding operation is
unavailable.
When the paste pellets run out during the binding operation, the machine
stops the job immediately and the binding operation also becomes
unavailable.
2
Reminder
Be sure to use the paste GC-501 exclusively provided for Perfect Binder
PB-501/PB-502.
Handle melted hot paste with great care. To ensure safety and product
reliability, observe the precautions for using paste pellets. Read p. 1-42
as well.
Do not overload the paste hopper with paste pellets.
Do not touch the lever in the paste hopper with your hand to avoid
breakdown.
Be sure to loosen the paste pellets inside the bag before adding them. If
paste pellets stick inside the paste hopper, see page 5-5 for details.
To Next Page
Loading...
Need help?
General
