1
Introduction/ Safety Information
1-36 bizhub PRO C6501
Disassemble and modification
WARNING
• Do not attempt to remove the covers and pan-
els which have been fixed to the product. Some
products have a high-voltage part or a laser
beam source inside that could cause an electri-
cal shock or blindness.
• Do not modify this product, as a fire, electrical
shock, or breakdown could result. If the prod-
uct employs a laser, the laser beam source
could cause blindness.
Power cord
WARNING
• Use only the power cord supplied in the pack-
age. If a power cord is not supplied, only use
the power cord and plug that is specified in
POWER CORD INSTRUCTION. Failure to use
this cord could result in a fire or electrical
shock.
• Use the power cord supplied in the package
only for this machine and NEVER use it for any
other product. Failure to observe this precau-
tion could result in a fire or electrical shock.
• Do not scratch, abrade, place a heavy object
on, heat, twist, bend, pull on, or damage the
power cord. Use of a damaged power cord (ex-
posed core wire, broken wire, etc.) could result
in a fire or breakdown.
Should any of these conditions be found, im-
mediately turn OFF the power switch, unplug
the power cord from the power outlet, and then
call your authorized service representative.
To Next Page
Loading...
Need help?
General
