Troubleshooting
5
bizhub PRO C6501 5-7
5.3 Clearing Mishandled Paper
When a paper misfeed occurs, the machine stops making copies and the
Jam Position Screen displays to indicate misfeed area(s).
The [Start] LED turns red on the control panel, and copying operation cannot
be continued until all the misfeed locations are cleared.
All the misfeed locations will be indicated by flashing/lighting numbers and
arrows on this screen. Flashing number and arrow indicate the jammed
position of the highest priority.
Action to remove mishandled paper is displayed in the message area, and
touching Illustration will display subsequent screens for the disposal action.
Follow the procedure below to remove mishandled paper.
!
Detail
A jam code can be displayed in the message area of the Jam Position
Screen. Contact your service representative, if desired.
Before performing the clearing procedure, see page 1-48 for the caution
label locations inside the machine.
[Illustration] key
Touch to display the subsequent
screens for the disposal action.
Message area
An action will be
displayed.
Paper jam position
display
Numbers flashing or
lighting indicate the
jammed positions.
To Next Page
Loading...
Need help?
General
