Preparation for Use
2
bizhub PRO C6501 2-13
External View
Internal View
No. Name Description
1 Primary (Main) tray Holds sets output in Fold mode or Punch mode.
2 Fold mode tray Holds sets output in Tri-Fold-in, Tri-Fold-out, Double Par-
allel, or Gate Fold mode.
3 Coordinating stopper Holds double-parallel- or gate-folded sets in order to pre-
vent them from collapsing.
4 Lower tray Holds cover sheets.
5 Lower tray guide plates Hold cover sheets to fix the position.
6 Upper tray Holds cover sheets.
7 Upper tray guide plates Hold cover sheets to fix the position.
8 Upper cover handle Opens to allow removal of mishandled paper.
9 Folding unit door Opens to allow removal of mishandled paper or waste pa-
per.
No. Name Description
1 Inlet lever Opens leftward to remove mishandled paper.
2 Post inserter conveyance le-
ver (behind the inlet lever)
Opens leftward to remove mishandled paper.
3 Waste basket Holds waste paper punched out.
4 Upper/Lower conveyance le-
ver
Opens rightward to remove mishandled paper.
5 Folding unit handle Withdraws the unit to allow removal of mishandled paper.
6 Conveyance knob/1 Can be turned counterclockwise to ease removal of mis-
handled paper.
7 Outlet lever Opens rightward to remove mishandled paper.
8 Upper/Lower right side lever Opens upward to remove mishandled paper.
9 Upper/Middle/Lower knob Can be turned clockwise to ease removal of mishandled
paper.
10 Left side lever (right/left) Opens leftward to remove mishandled paper.
11 Upper lever Opens upward to remove mishandled paper.
12 Conveyance knob/2 Can be turned clockwise to ease removal of mishandled
cover paper.
To Next Page
Loading...
Need help?
General
