13
Advanced Information
13-14 bizhub PRO C6501
13.4.2 Recalling Stored Job Settings
Follow the procedure below to recall jobs that are already stored.
Prerequisites
0 The Mode Memory Screen can be displayed only from the Copy Screen.
If any other screen such as Machine Status Screen is displayed, pressing
[Mode Memory] will be ignored.
1 Position the original.
2 Touch [Copy] tab to display the Copy
Screen, then press [Mode Memory]
on the control panel.
The Mode Memory Screen will be
displayed.
3 Touch a job number key to select a job you want to recall.
– The job keys numbered from 01 to 18 are displayed on the screen.
Touching [Next] will display the keys from 19 to 30.
– The desired job can also be selected by entering two-digit number
from the control panel keypad.
4 Touch [Job Check].
The Job Recall Check Screen displays to enable you to review the
settings.
To Next Page
Loading...
Need help?
General
