Job Management
14
bizhub PRO C6501 14-5
2
Reminder
This will not function if printing operation has already been started for the
selected job.
To specify the next job to be printed:
Touch to highlight the desired reserve job key, then touch [Print Next].
The highlighted reserve job will be moved just under the current print job.
To change the order of jobs:
Touch to highlight the desired reserve job key, then touch [Priority].
The highlighted job will be advanced by one in printing order unless the job
preceding the selected one is already in progress.
If printing order cannot be changed for the selected job, a message will be
displayed for information.
To suspend reserve job:
Touch to highlight the desired reserve job key, then touch [Suspend].
Printing operation for the selected job will be suspended and kept stored in
memory.
In this case, the letters [Suspended] on the key at the bottom of the screen
will turn red to prompt you that a suspended job remains in the machine.
Touch [Suspended] to resume printing operation. See page 14-9 for details.
To clear reserve job:
Touch to highlight the desired reserve job key, then touch [Delete].
Touch [Yes] on the popup menu to clear the selected job.
All the data of the selected job will be cleared.
To check the settings of reserve job:
Touch to highlight the desired reserve job key, then touch [Details].
Check the settings of the selected job on the screen. Touch [Close] to return
to the Job List Screen.
To Next Page
Loading...
Need help?
General
