Output Applications
12
bizhub PRO C6501 12-73
12.9.1 Non-sort/ Collate/ Uncollate Output to the Primary (Main)
Tray
A machine with Finisher FS-607 installed is set to output non-sorted sets to
the primary (main) tray by default, regardless of whether or not to be
equipped with other optional devices.
Please select an output mode by following the procedures below.
!
Detail
You can change the initial output mode in the Utility setting. See page 5-
40 of POD Administrator’s reference for details.
For detailed specifications, see page 3-3 and page 7-10.
Procedure
1 Position the original.
2 Touch [Output Appli.] on the Copy Screen.
The Output Application Screen will be displayed.
Output tray positions are indicated as square marks on the front image
of the machine, and the tray mark currently selected appears
highlighted.
If the primary (main) tray is not selected, touch [Output Tray] to select
it. See page 12-3 for details.
To Next Page
Loading...
Need help?
General
