9
Basic Job Settings
9-52 bizhub PRO C6501
– To set the desired custom size:
(1) Touch [Size Setting], then touch [Custom].
(2) Select the lengthwise/widthwise dimension key to highlight it,
then use [+], [,], or touch screen keypad to enter the desired spe-
cial size.
Entered size should fall within 140 - 330 mm in lengthwise dimen-
sion, 182 - 487 mm in widthwise dimension.
(3) Similarly, touch the trimming width key to highlight it, then enter
the desired amount. With the Trimming mode selected, the ma-
chine will output printed sets trimmed by the specified amount.
Entered amount should fall within 1 - 40 mm.
(4) Touch [Lead Edge], [Rear Edge], or [Center] to specify the de-
sired image position.
(5) Touch [OK] to complete the setting and return to the Paper Set-
ting Screen.
Touching [Fix] will complete the setting and directly return to the
Copy Screen.
To Next Page
Loading...
Need help?
General
