Contents-2 bizhub PRO C6501
4.8 Disposing Punch Waste ..................................................................4-46
4.9 Disposing Trimmings ......................................................................4-51
4.10 Removing Finished Sets from Large Capacity Stacker LS-505 ..4-55
4.11 Suspending/Restarting Output to Finisher FS-521 ......................4-59
5 Troubleshooting
5.1 If “Please Call Service C-####” Message Is Displayed ..................5-3
5.2 If Paste Pellets Stick Inside Paste Hopper ......................................5-5
5.3 Clearing Mishandled Paper ..............................................................5-7
5.4 If [MACHINE] Tab Blinks in Orange ...............................................5-10
5.5 If “Memory Full” Message Is Displayed: Memory Overflow ........5-13
5.6 If Power OFF/ON Screen Is Displayed ...........................................5-14
5.7 Troubleshooting Tips ......................................................................5-15
6 Maintenance
6.1 Cleaning the Machine .......................................................................6-3
6.2 Checking Copy Count .......................................................................6-5
6.3 Cleaning Conveyance Belt of Saddle Stitcher Tray .......................6-8
6.4 If “Receiver Exchange” Message Is Displayed .............................6-11
6.5 Preventive Maintenance .................................................................6-12
6.6 Precautions for Paste Pellets and the Perfect Binder .................6-13
7 Specifications
7.1 Main Body Specifications .................................................................7-3
7.2 Option Specifications ........................................................................7-5
8 Before Making Copies
8.1 Control Panel and Basic Screens ....................................................8-3
8.1.1 Control Panel ..................................................................................8-3
8.1.2 Copy Screen ...................................................................................8-6
8.1.3 Machine Status Screen ...................................................................8-8
8.2 General Copy Operation .................................................................8-10
8.3 Positioning the Original ...................................................................8-13
8.3.1 Positioning originals into the ADF .................................................8-13
8.3.2 Positioning the Original on Original Glass ....................................8-17
To Next Page
Loading...
Need help?
General
