Application Functions
11
bizhub PRO C6501 11-55
– To specify the erase amount for Center Erase:
Confirm that the center erase amount in the illustration is highlight-
ed. If not, touch [Center] on the right side of the screen to highlight
it.
Use [,] and [+], or touch panel keypad to enter the desired erase
amount.
6 Touch [OK] to complete the setting.
– To restore the previous setting, touch [Cancel].
– To release the Frame Center Erase function with the current setting
remained, touch [Function Off].
7 Touch [OK] on the Application Screen.
The Copy Screen will be restored, with highlighted [Frame/Fold] key
displayed under the [Application] key.
Use this key to jump to the subsequent screen to make any setting
change.
8 Enter the desired print quantity from the control panel keypad, then
press [Start].
The machine will start printing when ready for output.
To Next Page
Loading...
Need help?
General
