STORAGE 153
Info
Do not use non-porous materials since they prevent humidity from escaping,
thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm
up properly, the water vapor produced during combustion condenses and causes
valves and exhaust system to rust.
18.2Preparing for use after storage
401059-01
– Remove the motorcycle from the lift stand. ( p. 65)
–
Recharge the battery. x ( p. 116)
–
Install the battery. x ( p. 116)
– Set the clock. ( p. 27)
– Refuel. ( p. 48)
– Perform checks and vehicle care when preparing for use. ( p. 40)
– Take a test ride.
To Next Page
Loading...
Need help?
General
