CONTROLS 24
5.11Combination instrument - function buttons
800083-11
You can change the display mode with the M button .
Possible display modes are distance traveled (Odo), trip master 1 (Trip 1) and trip mas-
ter 2 (Trip 2).
Press the S button to reset the trip master 1 function (Trip 1) and trip master 2 function
(Trip 2) to 0.00.
5.12Combination instrument - indicator lamps
800083-12
The indicator lamps offer additional information about the operating state of the motorcy-
cle.
Possible states
The turn signal indicator light flashes green simultaneously with the turn
signals – Turn signal light is switched on.
Low fuel warning lamp lights up orange – Fuel level has reached the
reserve mark. Display switched to Trip F.
Temperature warning lamp lights up red – Coolant temperature has reached
a critical value.
High beam indicator lamp lights up blue – High beam is switched on.
The idling speed indicator lamp lights up green – The transmission is
switched to idle.
To Next Page
Loading...
Need help?
General
