SERVICE SCHEDULE 51
8.1Service schedule
K10N K75A K150A K300A
Check that the electrical equipment is functioning correctly. • • • •
Read out the fault memory using the KTM diagnostics tool. x
• • • •
Check the measured service values with the KTM diagnostics tool. x
• • •
Change the engine oil and filter, clean the oil screens. x ( p. 141)
• • • •
Check the front brake linings. ( p. 91) • • • •
Check the rear brake linings. ( p. 100) • • • •
Check the brake discs. ( p. 88) • • • •
Check the brake lines for damage and leakage. • • • •
Check the rear brake fluid level. ( p. 97) • • • •
Check the free travel of the foot brake lever. ( p. 96) • • • •
Lubricate the linkage of the rear wheel suspension. x
•
Check that the shock absorber and fork are leak tight. If necessary and depending on use, service
the fork and shock absorber.
• • • •
Check the swingarm bearing. x
• • •
Check the wheel bearing for play. x
• • •
Check the tire condition. ( p. 110) • • • •
Check the tire air pressure. ( p. 112) • • • •
Check the spoke tension. ( p. 113) • • • •
Check for rim run-out. x
• • • •
Check the chain, rear sprocket, engine sprocket and chain guide. ( p. 78) • • •
Check the chain tension. ( p. 75) • • • •
Grease all moving parts (e.g. side stand, hand lever, chain, ...) and check for smooth operation. x
• • • •
To Next Page
Loading...
Need help?
General
