KTM Freeride 250 R EU User Manual

12 SERVICE WORK ON THE CHASSIS 37
12.1 Raising the motorcycle with the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
B01729-01
– Raise the motorcycle at the frame underneath the engine.
Lift stand (54829055000)
The wheels must no longer touch the ground.
– Secure the motorcycle against falling over.
12.2 Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
B01666-10
– Remove the motorcycle from the lift stand.
– Remove the lift stand.
– To park the motorcycle, press side stand 1 to the ground with your foot and lean
the motorcycle on it.
Info
When you are riding, the side stand must be folded up and secured with the
rubber band.
12.3 Bleeding the fork legs
Preparatory work
– Raise the motorcycle with the lift stand. ( p. 37)
B01736-10
Main work
– Release bleeder screws 1.
Any excess pressure escapes from the interior of the fork.
– Tighten the bleeder screws.
Finishing work
– Remove the motorcycle from the lift stand. ( p. 37)

KTM Freeride 250 R EU Specifications

General

Brand	KTM
Model	Freeride 250 R EU
Category	Motorcycle
Language	English