KTM Freeride E-XC User Manual

7 DISPLAY 27
7.1 Multifunction display
7.1.1 Multifunction display
The multifunction display is attached in front of the seat.
402132-10
Overview of the multifunction display
1 Map-select tip switch ( p. 27)
2 Driving mode display ( p. 27)
3 Electric motor indicator lamp ( p. 28)
4 Charge level indicator ( p. 28)
7.1.2 Map-select tip switch
402133-10
The map-select tip switch

determines the driving mode.
Possible states
• The vehicle is in standby mode– the map-select tip switch is active.
• The vehicle is in ready mode– the map-select tip switch is active.
• All other vehicle conditions– the map-select tip switch is inactive.
7.1.3 Driving mode display
402137-01
Red driving mode displays with the numbers 1, 2 or 3 show the driving mode selected.
Three different driving modes are available. The driving modes determine how the vehi-
cle reacts to throttle grip operation.
The figures only show approximate values for illustrative purposes, and do not describe
the actual reaction.
Driving mode 1 is Economy: the motor torque is reduced by half.
Driving mode 2 is Standard: the further the throttle grip is twisted open, the more the
motor power increases.
Driving mode 3 is Advanced: the greatest increase in power occurs immediately, after
which the motor power increases more slowly.

KTM Freeride E-XC Specifications

General

Brand	KTM
Model	Freeride E-XC
Category	Motorcycle
Language	English