KTM Freeride E-XC User Manual

12 SERVICE WORK ON THE CHASSIS 63
12.20 Folding the seat up
C00805-10
–
Push the release lever

in the direction of the arrow.
– Lift the seat and fold it up.
12.21 Locking the seat
C00804-01
– Fold down the seat and push it down.
The seat engages with an audible click.
– Finally, check that the seat is correctly locked.
12.22 Removing the spoiler
Preparatory work
– Deactivate the vehicle. ( p. 37)
– Fold the seat up. ( p. 63)
– Remove the KTM PowerPack. ( p. 96)
– Mount the covering cap. ( p. 64)
C00763-10
Main work
–
Remove screws

.
C00764-10
–
Remove screw

.
–
Remove screw

.
– Take off the spoiler.
– Repeat the operation on the opposite side.

KTM Freeride E-XC Specifications

General

Battery Capacity	3.9 kWh
Power Output	18 kW (24 hp)
Torque	42 Nm
Rear Suspension	WP XPLOR PDS shock absorber
Seat Height	910 mm
Weight	111 kg
Ground Clearance	340 mm
Suspension Front Travel	250 mm
Suspension Rear Travel	260 mm
Motor Type	Permanent magnet synchronous motor
Charging Time 80%	75 minutes
Charging Time 100%	Approx. 110 min
Front Suspension	WP XPLOR 43
Top Speed	80 km/h
Tire Front	80/100-21
Front Brake	260 mm disc, 2-piston floating caliper