EasyManuals Logo
Home>KTM>Motorcycle>Freeride E-XC

KTM Freeride E-XC User Manual

KTM Freeride E-XC
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
13 BRAKE SYSTEM 75
Warning
Danger of accidentsReduced braking efficiency due to use of non-approved brake linings.
Brake linings available from accessory suppliers are often not tested and approved for use on KTM vehicles. The construc-
tion and friction factor of the brake linings and therefore the brake power can differ considerably from the original KTM
brake linings. If brake linings are used that differ from the originals, there is no guarantee that they comply with the origi-
nal license. The vehicle no longer corresponds to the condition at delivery, and the warranty is no longer valid.
Warning
Danger of accidentsUnsuitable brake fluid damages the brake system.
DOT 5 brake fluid attacks seals and brake lines. DOT 5 brake fluid is silicone-based and purple in color.
Do not use DOT 5 brake fluid.
Warning
Environmental hazardHazardous substances cause environmental damage.
Dispose of oils, grease, cleaning agents, brake fluid etc. properly and in compliance with the applicable regulations.
Info
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
Preparatory work
Deactivate the vehicle. ( p. 37)
Fold the seat up. ( p. 63)
Remove the KTM PowerPack. ( p. 96)
Mount the covering cap. ( p. 64)
C00724-11
Main work
(Freeride ESX)
Move the brake fluid reservoir attached to the right of the handlebar to a hori-
zontal position.
Remove screws
.
Remove cover
with membrane
.
M00686-11
(Freeride EXC)
Move the brake fluid reservoir attached to the right of the handlebar to a hori-
zontal position.
Remove screws
.
Remove cover
with membrane
.
C00725-10
Remove screws
and spacers.
(Freeride EXC)
Remove the cable tie(s).
Press back the brake linings with a light lateral tilting of the brake caliper on the
brake disc.
Carefully pull the brake caliper backward from the brake disc.
Press the brake piston back to its basic position and make sure that no brake fluid
overflows from the brake fluid reservoir, extracting brake fluid if necessary.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM Freeride E-XC and is the answer not in the manual?

KTM Freeride E-XC Specifications

General IconGeneral
BrandKTM
ModelFreeride E-XC
CategoryMotorcycle
LanguageEnglish

Related product manuals