5-S21
G2160, WSM
STEERING
(6) Checking Voltage
Checking the Battery Terminal Voltage
1. Measure the voltage between the positive (+) and negative (-)
battery terminals (1), (2).
2. If the voltage is out of factory specification, recharge the battery
and go to the following checking.
• After jump-starting the machine's engine, keep the support
vehicle's engine also running for 5 minutes or longer. Then
disconnect the booster cables (after the battery voltage is
restored).
W1016318
Battery voltage Factory spec. More than 12V
(1) Positive Terminal (2) Negative Terminal
To Next Page
Loading...
Need help?
General
