G-12
G2160, WSM
G GENERAL
8. CHECK AND MAINTENANCE
CAUTION
• Be sure to check and service the machine on a flat place with engine shut off, the parking brake on and
chock the wheels.
[1] DAILY CHECK
To prevent trouble from occuring, it is important to know the condition of the machine. Check the following items
before starting.
Checking
• Check areas where previous trouble was experienced.
• Walk around the machine.
1. Oil and water leak
2. Engine oil level
3. Coolant level in the recovery tank
4. Damage of machine body, tightness of all bolts and nuts
5. Radiator screen
6. Panel screen
7. Air cleaner
8. Oiling
•Mower
1. Make sure blade bolts are tight.
2. Check blades for wear or damage.
3. Check all hardware.
4. Make sure all pins are in place.
• While sitting in the operator’s seat,
1. Speed control pedal
2. Brake pedal
3. Parking brake
• Turning the key switch “ON”
1. Head lights
• Starting the engine,
1. Color of the exhaust fumes
2. If either of safety start switch and seat safety control do not operate properly, contact your KUBOTA Dealer
immediately.
3. Check for abnormal noise and vibration.
4. Check Easy checker
TM
.
To Next Page
Loading...
Need help?
General
