6-S8
G2160, WSM
HYDRAULIC SYSTEM
Relief Valve
1. Remove the bolt (1).
2. Remove the shims (3), washer with rubber (2), spring (4) and
steel ball (5).
3. Remove the plug (10).
4. Remove the shims (9), O-ring (6), spring (8) and poppet (7).
(When reassembling)
• Take care not to damage the O-rings.
• Install the relief valve, noting the number of shims.
• After reassembling the relief valve, be sure to adjust its
setting pressure. (See page 6-S3.)
W1013734
(1) Bolt
(2) Washer with Rubber
(3) Shims
(4) Spring
(5) Steel Ball
(6) O-ring
(7) Poppet
(8) Spring
(9) Shims
(10) Plug
To Next Page
Loading...
