Kubota GL9000D-AU-B User Manual

GENERATOR
GL6000A-AU-B, GL6000D-AU-B,GL9000A-AU-B, GL9000D-AU-B, WSM
2-S24
Grounding of Stator Coil
1. Measure the insulation resistance between each stator winding
and lamination with a megohm meter.
2. Reading should be more than 1 MΩ at 500 V.
3. If continuous, replace the stator or contact service station.
9Y1211607GRS0033US0
(3) Rotor Coil
Main Field Winding (Rotor Coil)
1. Measure the coil resistance between each end of field coil.
2. If the resistance is not as specified, replace the rotor assembly
or contact service station.
(Refer to 2-M16.)
9Y1211607GRS0034US0
Grounding of Rotor Coil
1. Connect leads of a megohm meter between each lead and
exciter rotor laminations.
2. Reading should be more than 1 MΩ at 500 V.
3. If continuous, replace the rotor assembly or contact service
station.
9Y1211607GRS0035US0
Checking Generator's Ball Bearing
1. Hold the bearing (1), and push and pull the outer race in all
directions to check for wear and roughness.
2. Turn the outer race to check rotation.
3. If there is any defect, replace it.
9Y1211607GRS0036US0
[A] GL6000A-AU-B, GL6000D-AU-B [B] GL9000A-AU-B, GL9000D-AU-B
Resistance Factory specification Refer to 2-S8.
(1) Ball Bearing
KiSC issued 06, 2016 A

Kubota GL9000D-AU-B Specifications

General

Brand	Kubota
Model	GL9000D-AU-B
Category	Portable Generator
Language	English