Kubota GL9000D-AU-B User Manual

ENGINE
GL6000A-AU-B, GL6000D-AU-B,GL9000A-AU-B, GL9000D-AU-B, WSM
1-S25
[2] PREPARATION
(1) Separating Engine
Draining Engine Oil
CAUTION
• Be sure to stop the engine before draining the engine oil.
1. After warming up, stop the engine.
2. Place an oil pan underneath the oil drain plug (1).
3. Open the oil drain plug (1), and remove the oil filler cap to
completely drain the engine oil.
4. After all engine oil is drained, close the oil drain plug (1).
Refer to "4. LUBRICANTS, FUEL AND COOLANT" on page
G-10.
9Y1211607ENS0031US0
Draining Coolant
CAUTION
• Do not remove the radiator cap while operating or
immediately after stopping. Otherwise, hot water will spout
out from the radiator. Wait for more then 10 minutes to cool
the radiator, before opening the cap.
1. Place a vessel underneath the water drain plug (1).
2. Open the water drain plug (1), and remove the radiator cap to
completely drain the coolant.
3. After all coolant is drained, close the water drain plug (1).
Refer to "4. LUBRICANTS, FUEL AND COOLANT" on page
G-10.
9Y1211607ENS0032US0
Battery
CAUTION
• Be sure to stop the engine before disconnecting the cables.
When removing the battery cables, disconnect the negative
cable first. When installing the battery cables, connect the
positive cable first.
1. Open the generator door.
2. Disconnect the cable from the battery negative terminal (2).
3. Disconnect the cable from the battery positive terminal (1).
9Y1211607ENS0033US0
(1) Oil Drain Plug [A] GL6000A-AU-B, GL6000D-AU-B
[B] GL9000A-AU-B, GL9000D-AU-B
(1) Water Drain Plug [A] GL6000A-AU-B, GL6000D-AU-B
[B] GL9000A-AU-B, GL9000D-AU-B
(1) Positive Terminal (2) Negative Terminal
KiSC issued 06, 2016 A

Kubota GL9000D-AU-B Specifications

General

Brand	Kubota
Model	GL9000D-AU-B
Category	Portable Generator
Language	English