EasyManuals Logo

Kubota M96SDTM User Manual

Kubota M96SDTM
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #140 background imageLoading...
Page #140 background image
PERIODIC SERVICE16
A Do not operate the tractor immediately after changing
the transmission fluid.
Run the engine at medium speed for a few minutes to
prevent damage to the transmission.
BChanging Front Differential Case Oil
1. To drain the used oil, remove the drain and filling plug
at the front differential case and drain the oil
completely into the oil pan.
2. After draining reinstall the drain plug.
3. Remove the oil level check plug.
4. Fill with the new oil up to the lower rim of check plug
port.
(See "LUBRICANTS" in "MAINTENANCE" section.)
5. After filling reinstall the filling plug and check plug.
(1) Drain plug
(2) Drain plugs (both sides)
Oil capacity
Standard 7.0 L (7.4 U.S.qts.)
With 80 in.
wide axle
8.0 L (8.5 U.S.qts.)
(1) Drain plug
(2) Filling plug
(3) Check plug

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kubota M96SDTM and is the answer not in the manual?

Kubota M96SDTM Specifications

General IconGeneral
BrandKubota
ModelM96SDTM
CategoryLawn Mower
LanguageEnglish

Related product manuals