8. GENERATOR/LEFT CRANK CASE COVER
8-2
VENOX250/250i
SERVICE INFORMATION
GENERAL INSTRUCTIONS
x The starter motor, generator, left crankcase cover and starter clutch can be serviced in the frame.
x Do not install the starter clutch forcedly.
x Install the generator by aligning the groove in the flywheel with the key on the crankshaft.
TORQUE VALUE
Flywheel nut: 7.5阡8.5kg-m
SPECIAL TOOLS
Flywheel holder
Flywheel puller
TROUBLESHOOTING
Hard starting/Poor performance at high speed
x Improperly tightened flywheel lock nut Starting noise
x Worn reduction gear
Starter clutch slips x Worn starter gear
x Worn starter clutch roller x Worn starter clutch roller
x Faulty starter clutch roller or spring x Faulty reduction gear shaft bearing
x Worn starter gear shaft O.D.
To Next Page
Loading...
Need help?
General
