1. GENERAL INFORMATION
1-2
VENOX250/250i
SPECIFICATIONS
Model No. RA50AA
Motorcycle name VENOX 250
Overall length (mm) 2325
Overall width (mm) 850
Overall height (mm) 1100
Wheel base (mm) 1600
Engine type 4 f
Displacement (cc) 249.4
Fuel type 92/95# nonleaded gasoline
Front wheel 82
Rear wheel 101
Dry weight (kg)
Total 183
Front wheel 90
Rear wheel 109
Gross weight(kg)
Total 199
Front wheel 120/80-17
Tires
Rear wheel 150/80-15
Ground clearance (mm) 150
Starting system
Starting motor
Type DOHC
Cylinder arrangement cylinder
Combustion chamber type Semi-sphere
Valve train DOHC-8V
Bore x stroke (mm) 58x 47.2
Compression ratio 11
Compression pressure
(kg/cm²)
17
Max. output (ps/rpm) ---
Max. torque (Kg.m/rpm) ---
Open 4˚
Intake
(mm)
Close 35˚
Engine
Open 31˚
Port
timing
Exhaust
(mm)
Close 0˚
Intake 0.10mm
Valve clearance
(cold)
Exhaust 0.10mm
Idle speed (rpm) 1300rpm
Lubrication type
Forced pressure &
wet sump
Oil pump type Inner/outer rotor
Oil filter type Wire gauze filter
Lubrication
System
Oil capacity 2.5L
Cooling Type Air +water cooling
Air cleaner type Paper element type
Fuel capacity 14liter
Type CVK
Main Jet NO Front:110 Rear:108
Venturi dia.(mm) I30 equivalent
Carburetor
Throttle type Butterfly type
Type CDI
Ignition timing B.T.D.C10° / 1000rpm
Spark plug NGK-CR8E
Ignition
System
Spark plug gap 0.6阡0.7mm
Electrical
Equipment
Battery Capacity 12V8AH
Clutch Type Wet multi-disc clutch
Type 5-Speed transmission
Operating method Foot operated
Type International type
1st gear 2.773
2nd gear 1.8
3rd gear 1.375
4th gear 1.111
Transmission Gear
Reduction
ratio
5th gear 0.965