KYMCO Venox 250 User Manual

15. IGNITION SYSTEM
15-3
VENOX250/250i
TROUBLESHOOTING
Engine stalls immediately after it starts
x Weak spark
x Improper ignition timing
x Faulty CDI unit
No spark at plug
x Faulty ignition switch
x Poorly connected, broken or shorted wire
Between pulser coil, CDI unit and ignition coil
Between exciter coil and CDI unit
Between CDI unit and ignition coil
Between CDI unit and ignition switch
Between ignition coil and spark plug
Engine starts but runs poorly
x Faulty ignition coil
x Poorly connected wire
x Faulty spark plug
x Spark plug cap electricity leakage
x Faulty A.C. generator
x Stator not installed properly (Loose)
x Faulty CDI unit

KYMCO Venox 250 Specifications

General

Brand	KYMCO
Model	Venox 250
Category	Motorcycle
Language	English