KYMCO Venox 250 User Manual

12. FRONT WHEEL/SUSPENSION/STEERING
12-4
VENOX250/250i
HANDLEBAR
REMOVAL
Remove two screws attaching the throttle
housing and the throttle housing.
Disconnect the throttle cable from the
throttle grip and then remove the throttle
pipe from the handlebar.
Remove the two master cylinder holder
bolts and the master cylinder.
Remove the two left handlebar switch
housing screws and the housing.
Remove the two clutch lever holder bolts
and the clutch lever holder.
Throttle Housin
g
Bolts
Throttle Cable
Screws
Throttle Pi
p
e
Master C
y
linde
r
Holde
r
Screws

KYMCO Venox 250 Specifications

General

Brand	KYMCO
Model	Venox 250
Category	Motorcycle
Language	English