Install the front wheel onto the front fork,
aligning the tab on the front fork with the
groove in the speedometer gearbox.
Insert the axle shaft and tighten the axle
nut.
Torque: 6.0阡8.0kg-m
Connect the speedometer cable and secure
it with the screw.
Bolts
Front Fende
FRONT FORK
REMOVAL
Remove the front wheel.
Remove the four front fender bolts and the
front fender.
Remove the front brake caliper.
Loosen the upper and lower fork bridge
bolts and the bolts attaching the front right
and left turn signal lights.
Remove the right and left front forks.
DISASSEMBLY
Remove the four front fender bolts.
Install the speedometer cable by
aligning the groove with the tab.
＊
To Next Page
Loading...
Need help?
General
