5-24
Operation on the Machine > Sending
Send to Me (E-mail)
When user login is enabled, the document is sent to the E-mail address of the logged in user.
Sending to Different Types of Destinations (Multi
Sending)
You can specify destinations that combine E-mail addresses, folders (SMB or FTP) and fax numbers
*1
. This is referred
to as Multi Sending. This is useful for sending to different types of destination (E-mail addresses, folders, etc.) in a single
operation.
*1 Fax functionality can only be used on products equipped with fax capability.
No. of broadcast items
E-mail: Up to 100
Folders (SMP, FTP): Total of 5 SMB and FTP
FAX: Up to 100
Procedures are the same as used in specifying the destinations of respective types. Continue to enter E-mail address or
folder path so that they appear in the destination list. Press the [
Start
] key to start transmission to all destinations at one
time.
An E-mail address must be set in user login for the user who logs in.
Adding a User (Local User List) (page 9-5)
To Next Page
Loading...
Need help?
General
