8-33
Setup and Registration (System Menu) > System Menu
Printer
When printing from computers, settings are generally made on the application software screen. However, the following
settings are available for configuring the defaults to customize the machine.
Printer
Item Description
Printer Emulation Set.
Set the emulation for operating this machine by commands oriented to other types of
printers.
Value: Line Printer, IBM Proprinter, EPSON LQ-850, PCL6, KPDL, KPDL (Auto)
Alt. Emulation
When you have selected [KPDL (Auto)] as emulation mode, you can switch between
KPDL and another emulation mode (alternative emulation) automatically according to
the data to print.
Value: Line Printer, IBM Proprinter, EPSON LQ-850, PCL6
KPDL Error Rpt
When an error has occurred during printing in KPDL emulation mode, set whether the
error report is output.
Value: Off, On
EcoPrint
EcoPrint conserves toner when printing. This is recommended for test copies where
lighter printing is not a problem.
Value: Off, On
Override A4/LTR
Select whether to treat A4 size and Letter, which are similar in size, as the same size
when printing.
Value
Off: A4 and Letter are not regarded as the same in size.
On: A4 and Letter are regarded as the same in size. The machine will use
whichever size is in the paper source.
Duplex
Select binding orientation for duplex mode.
Value: Off, Bind Long Edge, Bind Short Edge
Copies
Set the default number of copies, from 1 to 999.
Value: 1 to 999 copies
Orientation
Set the default orientation, [Portrait] or [Landscape].
Value: Portrait, Landscape
Wide A4
Turn this to on to increase the maximum number of characters that can be printed in a
line for an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at
10 pitch). This setting is only effective in PCL 6 emulation.
Value: Off, On
FormFeed TimeOut
Receiving print data from the computer, the machine may sometimes wait if there is no
information signaling that the last page does not have any more data to be printed.
When the preset timeout passes, the machine automatically prints the document. The
options are between 5 and 495 seconds.
Value: 5 to 495 seconds
LF Action
Set the line feed action when the machine receives the line feed code (character code
0AH).
Value: LF Only, LF and CR, Ignore LF
CR Action
Set the character return action when the machine receives the character return code
(character code 0DH).
Value: CR Only, LF and CR, Ignore CR
To Next Page
Loading...
Need help?
General
