Kyocera ECOSYS M3540dn User Manual

8-6
Setup and Registration (System Menu) > System Menu
Admin Rpt Set. (Admin Report Settings)
Configure settings for fax functions. For details, refer to the FAX Operation Guide .
Result Rpt Set. (Result Report Settings)
Report Print Opt NW Status Prints the optional network status, allowing you to check the information including
optional network interface firmware version, network address and protocol.
NOTE
This function is displayed when the optional Network Interface Kit or Wireless Network
Interface Kit is installed.
Report Admin Rpt Set.
Report Result Rpt Set.
Item Description
Result Rpt Set. Send Result Automatically print a report of transmission result when a transmission is
complete.
E-mail/Folder Print a report of E-mail/Folder transmission results.
Value: Off, On, Error Only
FAX For details, refer to the FAX Operation Guide .
Cancel
BeforeSend
Print a send result report when the job is canceled before being sent.
Value: Off, On
Dest. Info. Select the Destination Format for the send result report.
Value: Dest. or Name, Dest. and Name
FAX RX Result For details, refer to the FAX Operation Guide .
JobFinish Notice Attaches sent images to job finish notices.
Value: Do Not Attach, Attach SendImage
Item Description
NETWORK STATUS PAGE

Kyocera ECOSYS M3540dn Specifications

General

Brand	Kyocera
Model	ECOSYS M3540dn
Category	All in One Printer
Language	English