8-14
Setup and Registration (System Menu) > System Menu
Wireless
Network
Custom Setup
The detailed settings for wireless LAN can be changed. Set the items below then
press [Connect] to start the connection.
Netwk Name (SSID)
Set the SSID (Service Set Identifier) of the wireless LAN to which the machine
connects.
Up to 32 characters can be entered. Refer to the Character Entry Method on
page 11-11 for details on entering characters.
Connection Mode
Set the connection mode.
Value
Ad Hoc: Directly communicates with the device without going through an
access point. This method cannot be used to connect to two or more
devices.
Infrastructure: Performs communication through an access point.
Channel
Set channel.
Use the [
ā²
] or [
ā¼
] key or the numeric keys to enter a number.
The Channel can be set between 1 and 11.
Netwk Authentic.
Select network authentication type.
To select other options, open the device home page from a computer.
Value: Open, Shared, WPA-PSK
*1
, WPA2-PSK
*1
Encryption
Select encryption settings. The setting values vary depending on the āNetwk
Authentic.ā setting.
Data Encryption
Set the encryption method.
Value
When "Netwk Authentic." is set to [Open] or [Shared]:
Disable, WEP
When "Netwk Authentic." is set to [WPA-PSK] or [WPA2-PSK]:
TKIP
*2
, AES, Auto
*2
WEP Key
Register the WEP key. Press [Edit] and Enter the WEP Key using the numeric
keys.
Up to 26 characters can be entered. Refer to the Character Entry Method on
page 11-11 for details on entering characters.
Preshared Key
*3
Register the Preshared Key. Press [Edit] and Enter the Preshared Key using the
numeric keys.
The number of characters is between 8 and 64. Refer to the Character Entry
Method on page 11-11 for details on entering characters.
*1 Not displayed if you selected [Ad Hoc] for "Connection Mode".
*2 Not displayed if you selected [WPA2-PSK] for "Netwk Authentic.".
*3 Displayed if you selected [WPA-PSK] or [WPA2-PSK] for "Netwk Authentic.".
Item Description
To Next Page
Loading...
Need help?
General
