Kyocera TASKalfa 2201 User Manual

8-17
Job Accounting > Configuring Job Accounting
Configuring Job Accounting
Default Setting
Set the defaults for job accounting. To configure the settings, select the item in Default Setting and press the setting
item.
For details on each function, see the table below.
Admin/Accounting Job Account. Set. Default Setting
Item Description
Apply Limit This specifies how the machine behaves when the counter has reached the limit of restriction.
The table below describes the action taken.
Value
Immediately: Job stops when the counter reaches its limit.
Subsequently: Printing/scanning of the job continues but the subsequent job will be
rejected.
Alert Only: Job continues while displaying an alert message.
Copy/Print Count You can select how the copying and printing page counts are shown - either the total of both or
each of copying and printing individually (Split). The selection may influence restriction on the
count and count method. For details, refer to Restricting the Use of the Machine
(page 8-7) and
Account. Report (Accounting Report) (page 8-20).
Value: Total, Split
Counter Limit When you add a new account, you can change the default restrictions on the number of sheets
used. You can set any number from 1 to 9,999,999.
The items that can be set differ depending on whether [Split] or [Total] is selected for [Copy/
Print Count].
[Split] selected for Copy/Printer Count
Copy Restriction Sets the default restriction on the number of sheets used for copying.
Print Restrict. Sets the default restriction on the number of sheets used for printing.
ScanRest. (Other) Sets the default restriction on the number of sheets used for scanning (excludes copying).
FAX Restriction
*1
*1 Displayed only when the optional FAX Kit is installed.
Sets the default restriction on the number of sheets used for sending faxes.
[Total] selected for Copy/Printer Count
Print Restrict. Sets the default restriction on the total number of sheets used for copying and printing.
ScanRest. (Other) Sets the default restriction on the number of sheets used for scanning (excludes copying).
FAX Restriction Sets the default restriction on the number of sheets used for sending faxes.

Kyocera TASKalfa 2201 Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	5.7 s
Print speed (black, normal quality, A3)	10 ppm
Print speed (black, normal quality, A4/US Letter)	22 ppm
Copier resize	25 - 400 %
Maximum number of copies	999 copies
Scan to	E-mail, Image
Scan drivers	TWAIN
Grayscale levels	256
Image formats supported	BMP, JPG, TIF
Document formats supported	PDF
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Fax coding methods	MH, MMR (Fax coding method), MR
Fax resolution (black)	200 x 100 DPI
Fax transmission speed	4 sec/page
Digital sender	-
Printing colors	Black
Maximum duty cycle	- pages per month
Number of print cartridges	1
Processor family	ARM
Card reader integrated	No
Sound pressure level (printing)	62 dB
Sound pressure level (quiet mode)	40 dB
Paper input type	Cassette, Paper tray
Total input capacity	400 sheets
Total output capacity	250 sheets
Maximum input capacity	1300 sheets
Multi-Purpose tray input capacity	100 sheets
Paper tray media types	Plain paper
Paper tray media weight	64 - 105 g/m²
ISO A-series sizes (A0...A9)	A3, A4, A5
Maximum ISO A-series paper size	A3
Multi-Purpose Tray media weight	45 - 160 g/m²
Market positioning	Business
Standard interfaces	USB 2.0
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	76 W
Power consumption (PowerSave)	1.54 W
Power consumption (average operating)	415 W
Certification	TÜV/GS, CE

Weight and Dimensions

Depth	527 mm
Width	565 mm
Height	485 mm