Kyocera TASKalfa 2201 User Manual

9-8
Troubleshooting > Troubleshooting
Troubleshooting
Solving Malfunctions
The table below provides general guidelines for problem solving.
If a problem occurs with your machine, look into the checkpoints and perform procedures indicated on the following
pages. If the problem persists, contact your Service Representative.
Symptom Checkpoints Corrective Actions
Reference
Page
The screen does not
respond when the power
switch is turned on.
Check the power cord. Connect both ends of the power cord
securely.
page 2-8
Pressing the [Start] key
does not produce copies.
Is there a message on the screen,
KYOCERA Client Tool, or the Status
Monitor?
Determine the appropriate response to
the message and respond accordingly.
page 9-11
Is the machine in Sleep mode? Press any key on the operation panel to
recover the machine from Sleep mode.
page 2-20
Blank sheets are ejected. Are the originals loaded correctly? When placing originals on the platen,
place them face-down and align them
with the original size indicator plates.
page 5-2
When placing originals in the document
processor, place them face-up.
page 5-3
Paper often jams. Is the paper loaded correctly? Load the paper correctly. page 3-7
page 3-10
Is the paper of the supported type? Is it
in good condition?
Remove the paper, turn it over, and
reload it.
page 3-7
Is the paper curled, folded or wrinkled? Replace the paper with new paper. page 3-7
Are there any loose scraps or jammed
paper in the machine?
Remove any jammed paper. page 9-16
2 or more sheets are
overlaps when ejected.
(multi feed)
― Load the paper correctly. page 3-7
page 3-10
Printouts are wrinkled. Is the paper damp? Replace the paper with new paper. page 3-5

Kyocera TASKalfa 2201 Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	5.7 s
Print speed (black, normal quality, A3)	10 ppm
Print speed (black, normal quality, A4/US Letter)	22 ppm
Copier resize	25 - 400 %
Maximum number of copies	999 copies
Scan to	E-mail, Image
Scan drivers	TWAIN
Grayscale levels	256
Image formats supported	BMP, JPG, TIF
Document formats supported	PDF
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Fax coding methods	MH, MMR (Fax coding method), MR
Fax resolution (black)	200 x 100 DPI
Fax transmission speed	4 sec/page
Digital sender	-
Printing colors	Black
Maximum duty cycle	- pages per month
Number of print cartridges	1
Processor family	ARM
Card reader integrated	No
Sound pressure level (printing)	62 dB
Sound pressure level (quiet mode)	40 dB
Paper input type	Cassette, Paper tray
Total input capacity	400 sheets
Total output capacity	250 sheets
Maximum input capacity	1300 sheets
Multi-Purpose tray input capacity	100 sheets
Paper tray media types	Plain paper
Paper tray media weight	64 - 105 g/m²
ISO A-series sizes (A0...A9)	A3, A4, A5
Maximum ISO A-series paper size	A3
Multi-Purpose Tray media weight	45 - 160 g/m²
Market positioning	Business
Standard interfaces	USB 2.0
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	76 W
Power consumption (PowerSave)	1.54 W
Power consumption (average operating)	415 W
Certification	TÜV/GS, CE

Weight and Dimensions

Depth	527 mm
Width	565 mm
Height	485 mm