2-10
Installing and Setting up the Machine > Administrator User Name and Password
Administrator User Name and Password
If you are setting a function that requires administrator rights, you must enter your login user name and login password.
The factory default login user name and login password are set as shown below.
You can change the default login user name and login password. Refer to Administrator Setting
on page 2-11.
You will be unable to log in if you forget your login user name or login password.
If job accounting is enabled, you need to enter an account ID. Refer to Login/Logout
on page 8-22.
1
Enter the login user name.
1 If this screen is displayed during operations, press the [OK] key while the column for
entering a login user name is selected.
2 Enter the login user name using the numeric keys and press the [OK] key.
2
Enter the login password.
1 Press the [▼] key to select the column for entering a login password and press the [OK]
key.
2 Enter the login password using the numeric keys and press the [OK] key.
3
Press [Login].
Login User Name Login Password
Admin
*1
*1 Upper case and lower case letters are distinguished (case sensitive).
Admin
*1
Character Entry Method (page 10-4)
Character Entry Method (page 10-4)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
