Kyocera TASKalfa 2201 User Manual

8-22
Job Accounting > Using Job Accounting
Using Job Accounting
This section explains procedures while setting job accounting.
Login/Logout
If job accounting is enabled, an account ID entry screen appears each time you use this machine.
Use the procedure below to login and logout.
Login
1 In the screen below, enter the account ID using the numeric keys and press the [OK] key.
2 Proceed to complete the rest of the steps.
Logout
When the operations are complete, press the [Logout] key to return to the account ID entry screen.
Password Protect Administrator Settings
If the following account ID entry screen appears on your PC, enter the assigned Account ID and then click [OK].
NOTE
• If you entered a wrong character, press the [Clear] key and enter the account ID again.
• If the entered account ID does not match the registered ID, a warning beep will sound
and login will fail. Enter the correct account ID.
Account ID:
Counter

Kyocera TASKalfa 2201 Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	5.7 s
Print speed (black, normal quality, A3)	10 ppm
Print speed (black, normal quality, A4/US Letter)	22 ppm
Copier resize	25 - 400 %
Maximum number of copies	999 copies
Scan to	E-mail, Image
Scan drivers	TWAIN
Grayscale levels	256
Image formats supported	BMP, JPG, TIF
Document formats supported	PDF
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Fax coding methods	MH, MMR (Fax coding method), MR
Fax resolution (black)	200 x 100 DPI
Fax transmission speed	4 sec/page
Digital sender	-
Printing colors	Black
Maximum duty cycle	- pages per month
Number of print cartridges	1
Processor family	ARM
Card reader integrated	No
Sound pressure level (printing)	62 dB
Sound pressure level (quiet mode)	40 dB
Paper input type	Cassette, Paper tray
Total input capacity	400 sheets
Total output capacity	250 sheets
Maximum input capacity	1300 sheets
Multi-Purpose tray input capacity	100 sheets
Paper tray media types	Plain paper
Paper tray media weight	64 - 105 g/m²
ISO A-series sizes (A0...A9)	A3, A4, A5
Maximum ISO A-series paper size	A3
Multi-Purpose Tray media weight	45 - 160 g/m²
Market positioning	Business
Standard interfaces	USB 2.0
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	76 W
Power consumption (PowerSave)	1.54 W
Power consumption (average operating)	415 W
Certification	TÜV/GS, CE

Weight and Dimensions

Depth	527 mm
Width	565 mm
Height	485 mm