COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Initial Issue Page 401
Sep. 30/11
Cleaning
23−70–40
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
CLEANING
1. GENERAL
This section contains a list of all required cleaning materials, general cleaning proce-
dures, applicable cautions and warnings related to the use of any cleaning material, and
instructions for cleaning the Model FA5000 major assemblies.
2. MATERIALS REQUIRED
Refer to Table Table 401 for a listing of required cleaning materials:
Table 401.
Cleaning Materials Required
Material Specification
Dry-Cleaning Solvent Federal Specification
MIL−PRF−680
Soft-Bristle Brush
Cotton Swabs
Lint-Free Cotton Cloth
NOTE: Equivalent substitutes may be used for all cleaning materials. All ma-
terials and chemicals may be obtained from any commercial source.
3. CLEANING PROCEDURES
WARNINGS: 1) OBSERVE ALL FIRE PRECAUTIONS WHEN USING FLAMMABLE
MATERIALS FOR CLEANING PURPOSES.
2) PERFORM OPERATIONS INVOLVING CLEANING SOLVENT IN A WELL-
VENTILATED AREA. AVOID PROLONGED BREATHING OF VAPORS OR
CONTACT WITH SKIN.
CAUTION: THE FA CIRCUIT BOARDS ARE SUSCEPTIBLE TO ELECTRO–STATIC DE-
STRUCTION (ESD). PRIOR TO HANDLING PWAs, ENSURE PROPER PER-
SONNEL GROUNDING TECHNIQUES ARE USED. INSURE THAT CARDS
ARE PLACED INTO STATIC SHIELDING CONDUCTIVE BAGS WHEN HAN-
DLING OR STORING.
Rev.05 Page 401
May 06/14
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
Need help?
General
