COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Rev. 04 Page 128
Feb. 27/14
Testing & Fault Isolation
23–70−40
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
5. READ−OUT CENTER/7 (ROC/7) − AUDIO DOWNLOAD & PLAYBACK
NOTE: ROSE 4.0 or higher on a ROC or RAU is recommended to download
directly from a CVR and convert audio into a .WAV for playback. Re-
fer to the Read-Out Support Equipment / Recorder Interface Software
version 4.0 or Higher Operator’s Manual, p/n 165E1696-03, to Re-
trieve Flight Data and / or Audio Data from a Recorder.
(1) Click on the Copy button. Set the File Name to Filename.cvdr (the system will
use a default file name with the part number of the recorder and serial number
that was entered in the information fields of the test section).
(2) Click on the Save button.
(3) Select either Full Audio Data Download or Copy data from last XX Hrs. XX
Mins. Click OK. Copying of the data will start.
(4) When the “Copy Data is Complete” box is shown click on Yes. On the Decom-
pression Options menu select HQV1 through HQV3 and HQC.
(5) Click on the Microphone button. Select the Left Channel to be HQV1 and the
Right Channel to be HQC. Click OK to exit the dialog box.
(6) Click on the Play button. Confirm that the display changes and that the speak-
ers output the audio. Click on the Stop button when satisfied that the data is
being played back properly.
(7) Click on File => Exit to leave CVR Tester.
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
Need help?
General
