6. Software Control – Lightware Device Controller Software MX-FR Series Modular Matrix Frames – User's Manual 91
Presets
Preset operations can be done in the Crosspoint submenu on the
Preset tab. Each Lightware matrix router has 32 preset memories that
can be loaded and saved at any time. #preset
INFO:
preset loading has an effect on every output, except the locked
ones.
A preset can be selected by pressing its button on the left. Preset
preview (on the right) will show the crosspoint settings of input and
output ports.
Loading a Preset
Step 1. Select the Presets tab from the Crosspoint menu.
Step 2. Select the preset memory (Preset1... Preset32) you want to load.
Step 3. Press the Load button below the Preset preview list. Now the
preset is loaded.
Step 4.
Saving a Preset
Step 1. Make the desired crosspoint connections in Tile view or Grid
view.
Step 2. Select the preset memory (Preset1...Preset32) where you want
to save your current crosspoint connections.
Step 3. Press the Save button below the Preset preview list.
Step 4.
the preset is stored.
Renaming a Preset
Step 1. Select the preset memory (Preset1...Preset32) you want to
rename.
Step 2. Type the desired name and press the Rename Preset button; the
new name is stored.
Presets Tab
To Next Page
Loading...
Need help?
General
