Linksys LAPAC1750PRO User Manual

2
Section 1: Getting Started
LAPAC1750PRO Access Point Software User Manual
Web Browser and
Operating System
Configuration and administration of the
access point is provided through a Web-based
user interface hosted on the access point.
We recommend using one of the following
supported Web browsers to access the access
point Administration Web pages:
• Microsoft® Internet Explorer® version 9.x or
11.x (with up-to-date patch level for either major
version)
• Mozilla Firefox version 26.x
• Google Chrome version 32.x
• Safari version 5.x
The administration Web browser must have
JavaScript™ enabled to support the interactive
features of the administration interface.
Security Settings Ensure that security is disabled on the wireless
client used to initially configure the access point.
Wireless Client Requirements
The access point provides wireless access to any client with a properly configured
Wi-Fi client adapter for the 802.11 mode in which the access point is running. The
access point supports multiple client operating systems. Clients can be laptop
or desktop computers, personal digital assistants (PDAs), or any other handheld,
portable or stationary device equipped with a Wi-Fi adapter and supporting
drivers.
In order to connect to the access point, wireless clients need the software and
hardware described in the following table.
Table 2: Requirements for Wireless Clients
Required Component Description
Wi-Fi Client Adapter Portable or built-in Wi-Fi client adapter that
supports one or more of the IEEE 802.11 modes
in which you plan to run the access point. (IEEE
802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac
modes are supported.)
Wireless Client
Software
Client software, such as Microsoft Windows
Supplicant, configured to associate with the access
point.
Client Security
Settings
Security should be disabled on the client used to
do initial configuration of the access point.
If the Security Mode on the access point is set to
anything other than plain text, wireless clients
will need to set a profile to the authentication
mode used by the access point and provide a valid
username and password, certificate, or similar user
identity proof. Security modes are Static WEP, IEEE
802.1X, WPA with RADIUS server, and WPA-PSK.
For information about configuring security on the
access point, see ”Virtual Access Point (VAP).”
Online Help, Supported Browsers, and
Limitations
Online help for the access point Administration Web pages provides information
about all fields and features available from the user interface (UI). The information
in the online help is a subset of the information available in the LAPAC1750PRO
Access Point Administrator’s Guide.
Online help information corresponds to each page on the access point
Administration UI.
For information about the settings on the current page, click the link on the
right side of a page or the More... link at the bottom of the help panel on the UI.
The following figure shows an example of the online help available from the links
on the user interface.

Linksys LAPAC1750PRO Specifications

General

Modulation	-
VLAN support	Yes
Frequency band	2.4, 5 GHz
Number of users	- user(s)
Channels quantity	- channels
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1750 Mbit/s
Internal	No
Certification	FCC, CE, IC
Product color	White
Cable lock slot type	Kensington
Ethernet LAN (RJ-45) ports	2
Security algorithms	802.1x RADIUS, WEP, WPA, WPA2
Antenna gain level (max)	5.2 dBi
Input current	2 A
AC input voltage	12 V
Power consumption (typical)	24 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	238 mm
Width	247 mm
Height	43.3 mm
Weight	520 g