GB
Connections
19
Connecting Headphones
Connect your headphones to the TV’s HEADPHONE
socket.
Before putting on the headphones, turn the volume
down then put the headphones on and slowly
increase the volume until you reach a comfortable
listening level.
Long-term exposure to loud music may
cause hearing damage. It is best to avoid
extreme volume when using headphones,
especially for extended periods.
The TV’s volume will not be affected. You
may control the audio level via the Audio
Receiver.
Connecting a Coaxial Audio Receiver
For better sound quality, you may want to play the audio through your multi-channel audio receiver.
1. Use an audio cable (not included) to connect
the TV’s Digital Audio Output (Coaxial) socket to
an external audio receiver’s audio coaxial input
socket.
2. Plug the connected devices into the mains socket
before switching on the TV.
3. Press the
button on the right bottom panel
under the TV frame or on the remote control to
turn on your TV.
4. Press the
button on the right bottom panel
under the TV frame or the INPUT button on the
remote control to display the INPUT SOURCE List.
Use the
buttons on the remote control to
select any desired input source and then press the
OK button to confirm.
Rear Right Bottom View of TV
HDMI1 (ARC)RFPC AUDIO PC INSCARTHEADPHONE
Digital Audio Output
(Coaxial)
Earphones Cable
(not included)
Audio Receiver
HDMI1 (ARC)RFPC AUDIO PC INSCARTHEADPHONE
Digital Audio Output
(Coaxial)
Rear Right Bottom View of TV
Audio Cable
(not included)
To Next Page
Loading...
Need help?
General
