20
1. Connect one end of the RF coaxial cable to the
aerial socket on the wall and the other end of the
cable to the RF (75Ω) socket at the rear right side
of your TV.
Initial Setup
Turning the TV On for the First Time
Do not connect the TV to the mains
supply until you have completed all
the connections.
2. Connect the mains cable to the mains socket after
you have completed all the connections.
3. At this stage, the TV switches to standby mode. The
red LED indicator will illuminate on the front panel of
the TV.
4. In standby mode, press the
button on the right
bottom panel under the TV frame or on the remote
control to turn the TV on. The red LED indicator will
turn off.
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The
button on the right bottom panel under the TV frame or on the remote control is only used for switching the
TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power,
please remove the mains plug from the mains socket.
First Time Setup
1. The first time you turn the TV on, it will go straight into the First Time
Setup menu. Please ensure the aerial is plugged in and then press the
OK button. (If you have already installed the TV using the Quick Start
Guide, please go to the section “Selecting the Input Source” on the next
page.)
2. Press the
buttons to select your desired language to be displayed on
the menu. The default on-screen menu language is set as English.
3. Press the
button to select Mode Setting. Press the buttons to
select your desired mode. If select Store Mode, a pop-up menu will be
display. Press the OK button to confirm or press any button to cancel and
return to the Mode Setting menu.
Home Mode Intended for use in home environment.
Shop Mode Intended for use in retail environment.
HDMI1 (ARC)RFPC AUDIO PC IN
SCARTHEADPHONE
Digital Audio Output
(Coaxial)
RF coaxial cable
(not included)
OR
To the mains
socket
• This instruction manual explains the basic instructions for operating this unit. Unless otherwise stated, all operations
described are based on remote control use.
• When an item in main menu is displayed gray, it means that the item is not available or cannot be adjusted.
• If you are going to watch TV using a set-top box, simply connect your TV and set-top box via a HDMI cable and select
HDMI in the Input Source menu.
First Time Setup
OSD Language English
Mode Setting Home Mode
Country UK
Auto Scan DTV
LCN
Move Adjust MENU: Return EXIT: Exit
On
Start
Please connect your aerial, change any settings you wish and select Start then
press OK to start tuning.
For the best picture quality in your home environment, we
recommend setting the TV to Home Mode.
First Time Setup
OSD Language English
Mode Setting Home Mode
Country UK
Auto Scan DTV
LCN
Move Adjust MENU: Return EXIT: Exit
On
Start
Please connect your aerial, change any settings you wish and select Start then
press OK to start tuning.
To Next Page
Loading...
Need help?
General
