56
Recording DTV Programme onto a USB Storage Device
Use this function to record the DTV programme you are watching on the main screen and save it for future viewing.
The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast
programme.
Please make sure the USB device is inserted. If not, a warning message will pop up.
1. Press the
button to record the programme that you are currently
watching.
2. Press the
button again, the recording progress bar will disappear.
3. Press the
button to stop recording.
Recording will stop automatically when the disk is full.
If you want to turn off your TV during recording, press the button on the right bottom panel under the TV frame
or on the remote control. A dialogue will display.
Press the
buttons to select your desired option and then press the OK button to confirm.
If you select the middle option in the box, the screen will turn off but the recording will still be in progress, the LED
indicator will alternatively flash red.
The recording is still in Progress. Do you want to switch off the TV?
Yes, Stop recording and switch off the TV.
Yes, turn off the screen and sound, but keep recording.
No
OK: Select
To Next Page
Loading...
Need help?
General
