22
Eco Friendly / Auto Standby Function
The latest eco-friendly power saving technology will automatically switch the TV into standby mode if the TV is left on and idle
for 4 hours or it does not receive an input signal for serveral minutes. A reminder screen will pop up and count down before the
switches to standby mode. Once the TV is switched to standby mode, the red LED indicator will illuminate on the front panel of
the TV.
Press the
button on the bottom panel of the TV or on the remote control to turn on your TV. The red LED indicator will turn off
and a pop up message will be prompt on the screen AFTER wake up from standby.
Selecting the Input Source
1. Press the button on the right bottom panel under the TV frame or the
INPUT button on the remote control to display the Input source list.
2. Press the
buttons to select the input source that you want: DTV /
ATV / AV / SCART / YPbPr / HDMI 1 / HDMI 2 / HDMI 3 / PC / USB.
3. Press the OK button to confirm your selection.
Alternative
Press the TV.RD button to switch to TV / digital radio channels
directly.
INPUT SOURCE
INPUT: Exit
DTV
ATV
AV
SCART
YPbPr
HDMI 1
HDMI 2
HDMI 3
PC
USB
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The
button on the right bottom panel under the TV frame or on the remote control is only used for switching the
TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power,
please remove the mains plug from the mains socket.
Channel Selection
• Press the CH + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.
Alternative
Press the LIST button to enter the Channel List. Then use the buttons to highlight and select the channel.
Press the OK button to view the selected channel.
• If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the
channel will then be unlocked (refer to page 35 for details on Channel Block).
• Press the FAV button to view the Favourite List. Then the
buttons to select your favourite list and then use the
buttons to highlight and select the channel from the list. Press the OK button to view the selected channel (refer to page 31
for details on Favourite Manager).
• Press the
button to return to the previously viewed channel.
Listening to the Radio (Radio Mode)
• In DTV mode, press the TV.RD button to switch between DTV and Digital radio channel.
• Press the CH
/ buttons on the remote control repeatedly to change the radio stations.
Alternative
Press the LIST button to enter the Channel List. Then use the buttons to highlight and select the station.
Press the OK button to listen to the selected station.
• Press the GUIDE button to see all the stations in the Programme Guide (refer to page 49 for details on EPG).
To Next Page
Loading...
Need help?
General
