9
1. To remove the stand assembly, untighten the screws holding the stand assembly to the rear of the TV. Slide the stand
assembly out.
2. This TV is designed to be wall-mounted with a standard mounting kit (sold separately) designed for flat-panel TVs. Mount this
TV according to the instructions included in the mounting kit. Due to space restrictions, we recommend that you make all
connections (refer to page 15-19 and page 51 for details) before mounting on to the wall.
Mounting the TV to a Wall
• Some models of TV are provided 4 screws inside the mounting holes. Be sure to use these supplied screws with
your mounting kit when attaching the mounting hooks to the TV set. The supplied screws are designed for the
TV. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc.
• Before mounting on the wall, untighten the screws inside the mounting holes.
• Remove the stand assembly before mounting the TV onto the wall.
• It is recommended that two people take part in the installation.
Keep all the spare screws
should you want to use the
stand assembly option.
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance:
for UK, please call our UK Call Centre on 0344 561 1234.
for Ireland, please call our Ireland Call Center on 1 890 818 575.
200 mm
100 mm
Four mounting holes
(size M4x5 screw)
M4
5mm
TV Weight (Without Stand): 4.4 kg
To Next Page
Loading...
Need help?
General
